1998 Chevrolet C1500 "missing bolts distributor cause" Questions

Ad

distributor needs a new bushing or replaced a Automotive shop has to "relearn" the the system. After you replace either one. So that they are working together. The vortec 5.0l and the 5.7l have intake

Ad

bolts missing What bolt is missing on or in distributor as if outer bolt holding distributor on to the engine this will allow distributor to move and your timing will move so the engine will not start

Ad

Question about Chevrolet C1500

1 Answer

...CHAIN AND GEAR ASSEMBLY. INCORRECTLY INSTALLED DISTRIBUTOR 1 TOOTH OFF IN EITHER ADVANCE OR ****** POSITIONS. DISTRIBUTOR ROTOR IS LOOSE ON THE DISTRIBUTOR SHAFT OR HOLD DOWN BOLT IS LOOSE OR

Question about Chevrolet C1500

1 Answer

...advanced or ****** positions. 4. A loose rotor on the distributor shaft. 5. A loose or missing dist hold down bolt. check and or adjust distributor and shaft, could also be a bad gear on end of

Question about Chevrolet C1500

1 Answer

...IN EITHER ADVANCE OR ****** POSITIONS. DISTRIBUTOR ROTOR IS LOOSE ON THE SHAFT OR HOLD DOWN BOLT IS LOOSE OR MISSING.- PERFORM THE CAMSHAFT ****** OFF SET TEST PROCEDURE - IGNITION MODULE HAS

...missing distributor hold down bolt An intermittent may be caused by any of the following conditions: • A poor connection • Rubbed through wire insulation • A broken wire inside the insulation ...

Question about Chevrolet C1500

1 Answer

missing and spark problem I've tried the boots with and without the dialectic grease, still is arcing out to the plug either way, Im not sure if i have auto or manual timing. I loosened the ...

...missing distributor hold down bolt A loose CMP sensor causing a variance in the sensor signal Incorrectly Installed distributor-1 tooth off in either advance or ****** positions Aloose distributor ...

...missing. Id reccoment changing the module first. Mark the base to engine block with whiteout. loosen the locking bolt on the distributor and rotate it so as you can get at the screws on the module ...

Question about Chevrolet C1500

1 Answer

...ADVANCE OR ****** POSITION, DISTRIBUTOR ROTOR IS LOOSE ON THE DISTRIBUTOR SHAFT OR HOLD DOWN BOLT IS LOOSE OR MISSING, PERFORM THE CAMSHAFT ****** OFFSET TEST PROCEDURE,IGNITION MODULE HAS

Not finding what you are looking for?
1998 Chevrolet C1500 Logo

634 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...