1998 Chevrolet Astro "ignition module" Questions

...THAT CONTROL COIL AND IGNITION MODULE.IF FUSE GOOD.SCAN VECHICLE FOR FAULTY IGNITION MODULE FAULTY CRANKSHAFT SENSOR AND PCM.HAVE VECHICLE CODE SCAN WITH A SCANNER THAT WILL SAVE YOU MONEY AND

...ignition module is please pic or just show me . thank you first what car year make and model are you talking about? im going to try answer you question anyways. if its a older vehicle the coil and ...

ignition module? sometimes smell a burnt wiring or plastic smell ? Did you check for spark? Is it getting gas at the fuel rail? If there is no spark then it could possibly be the crank position sensor

the coil assembly. But if you're having an ignition issue there is the ignition module bolted next to the coil on the same bracket. You may want to take off the module and have an Autozone test it

chevy astro van where is the control module on the chevy astro ban located? The control module is located just behind the ignition coil. Sorta hard to get to but we got it and the van is running great

1999 chev astro van multiple misfire I would have the ignition module checked and also check the grounds to the module,coil and the ecm. thats where i'd start.

p 1361 my car have code p 1361 and no start P1361 IC Circuit Low Voltage ignition module low voltage, make pin-out check at module connector hope it helps

...ignition module. It is located in the distributor. If you getting no spark and no fuel (no injector pulse) I would replace the ignition module and the pick-up coil. The pickup coil is the round piece ...

...turns over but no spark. Check for any blown ignition fuses(may be marked IGN1, 2, etc). check the ignition module located under the distributor rotor...check the coil(you can check it for

...ignition control module in my 1997 astrovan but i cant get it out does it have the 6 cylinder engine with the 3 coil packs on top? If so, remove spark plug wires from coil packs, remove 2 screws that ...