1997 Chevrolet Malibu "wiper arm" Questions

...use a 13mm socket or wrench to loosen the nut and then wiggle the arm off. If you need to change the motor, unclip the black molding that the wiper arms are on and you have full access to the

...wiper arm came loose At the lower end of your wiper arm there is a little black cap that looks like a top hat.You can take a flat head screw driver and pop it off revealing the nut.Place your wiper ...

...wiper arm adn wiper arm shaft. if the later is the case you can sometimes tighten the 15 mm nut that holds the arm to the shaft. but this will only work once or twice before the arm requires ...

...wiper off the screen, under the arm there is usually a small plastic tab that lifts the tounge that keeps the blade on the arm, if you are fitting new ones and the clip is stuck slide the blade ...

...arm nuts from wiper arms I memory serves me they have a plastic cap you pop off and theres a 10mm nut the holds them on,,, i think You can pry them off. Or lift the arm and wiggle it back and forth ...

wiper arm remove 1997 malibu wiper arm remove remove the plastic cap remove nut pry the arm off pierre

wiper arm on 1997 Chev Malibu The passanger side arm broke off in 2 places. I opened the hood and tried to take off the plastic cover below the windshield, but i couldnt get the drivers side wiper off

...wiper arm off of my 05 malibu maxx rear window ? the rear wiper arm is attached with a single nut in the center, 1.) pry the cap off that is covering the nut. It pivots toward the blade. 2.) Remove ...

Wiper motor How hard is it to change the wiper motor? And how do I do it? remove wiper arms the grill used 10mm socket 3 bolt holding the wiper housing another 3 bolt that hold the wiper motor that it

...and you have to take the rill right under your windshield off and snap the wiper motor arm back on to the wiper motor and then put the grill back on there and then you are all set to use them