1994 Chevrolet Lumina "gear oil put chevy" Questions

...level if by 'she won't move', you mean when you put the car into gear, it doesn't move. That could also indicate sticking transmission solenoids which free up as the engine oils and ATF get warm.

...oil? I put a new head on my chevy aveo, but now it is leaking oil bad. The oil is getting on the timing belt and gears. The oil is also running down the front of the motor. What is causing the oil ...

...gear, Oil pressure stayes at 70 PSI. Need help finding out what caused the problem. Gears wearing out can be due to lack of lubrication. Since you have already replaced the gear, not a bad idea to ...

...had my Gear Oil changed out on my 2000 chevy blazer ZR2, my question is ...Is there a certain mixture that must be put in also? use chevy diff fluid and as an option there is a additive but not ...

...gear down. The torque converter uses oil pressure to determine when to change gear, i have come across this problem just once on a different vehicle & after hours of head scratching I done an oil ...

...end fluid do it use for a 2003 chevy tahoe 4WD 4.8L i think what you are talking about is the front differential. you will wanna put gear oil in it. the correct weight would be found in your

...oil pump shaft not sure what your putting distributor in ? but if it is chevy ford look at the bottom of the gear should be slotted you my have timing marks on but may need to take a relatively long ...

...gear oil in on a 1984 chevy S-10 4x4 p/u OK, if you are talking about the differential, there should be either a plug at the top of the differential case or there should be a ventilation tube ...

...oil pan I put the gear kit where the timing cover is and new oil sensor but when engine warms up it goes back down and the car doesn't have the same power it had would need to see it to know whats ...

...gear my oil presure drops down to almost stalling This is odd but somewhat normal. This is the way the electronic gauges register. You can try to replace the oil sender to see if it registers ...