...tensioner pulley. Once the belt is free from the tensioner, CAREFULLY rotate the tensioner back into position. DO NOT allow the tensioner to suddenly snap into place or damage could occur to the ...
...tensioner pulley on my 1994 Astro van with no air conditioning? Is the pulley bolt left hand threaded? You don't need to remove any parts. Locate the belt tensioner and attach a wrench to the boss ...
...tensioner pulley on my 95 chevy truck siezed up.......I'm trying to remove the bolt holding the pulley in place but I may have stripped it because the bolt is relatively loose but will not come out. ...
...tensioner will have a new spring which will be stiffer than a worn in one. maybe try a belt the next grade up. If it is tight that is good. It is possible the belt streched. But if it is loose you ...
...by the belt or the tenchner i dont no? which one is it? If the belt is tight ? It might be the tensioner. The tension wheel shouldn't have any play at all. If you can grab it and move it
tensioner pulley I need pictures. I can see it. But do I need a johnson bar to take it off. Johnson bar, crow bar, wrench, or 3/8 braker bar. GM's normally have a square hole where the 3/8s braker bar
how do i loosen tension pulley stick your rachet or wrench in there and pull it up
nissan maxima 00 AC belt squeals for a moment and it goes away. If I turn on AC, lights, defrost, the belt squeals. It does not happen at high speed. this means your belt needs to be tightend, if its ...
Question about Chevrolet Astro
How to relieve the tension on a 1990 Chev astro van tension pulley You will need to put a socket on the bolt in the center of the tensioner and lift up as the tensioner is on a swing. Hope this helps.
347 questions posted
Usually answered in minutes!
481 Questions
367 Questions
305 Questions
244 Questions
248 Questions
