...intake manifold. What can it be? I have 2 ideas of what it could be. A head gasket or manifold gasket. intake manifold gasket. when it leaks water will enter a cylinder causing the sprark plug to ...
...intake manifold and vacuum hose. Bad Idle Air Control Motor (IAC) Low compression (170 psi + is OK) Start cleaning and repair these trouble spots and see is there any improvement. ==== For more ...
...intake manifold (See: Upper Intake Manifold) Fuel meter body Injector retainer lock nuts (J) and retainer (K) NOTE: Use care in removing the fuel injectors to prevent damage to the electrical ...
...intake manifold remove the intake manifold remove the remaining bolts from the accessory bracket on the front of the engine and set the A/C compressor and PS pump aside (DO NOT DISCONNECT HOSES) ...
...intake manifold. It simply plugs in to the manifold with sinthitc red seals as the gasket has a three wire connector and is easy to replace in alomst the center of the manifold mid way in relation to ...
...intake manifold those years) but they are almost always near the front of the intake manifold on top. The ECTS is usually black plastic with a brass or aluminum base that threads into the intake ...
intake manifold.i removed the intake and its badly corroded.is replacing the intake worth the price of a new one ?the only ones i can find are edelbrock .and run about 330 bucks.can i find one cheaper
...not from block. it may be a bad head gasket if it is leaking coolant. check to find the source of the leak. or if its leaking coolant from intake manifold gasket. also check water pump and all
...it sounds like you might have intake manifold vacuum leaks. make sure all mounting bolts are tight and all vacuum hoses going to and from the intake manifold are in good shape with no tears or
694 questions posted
Usually answered in minutes!
1,473 Questions
904 Questions
790 Questions
747 Questions
686 Questions