2001 Nissan Pathfinder "bracket holds blade fan" Questions

...bracket on the top of the platic fan housing. There is an overflow hose that is also clipped to the fan housing unlcip the hose and move it out of the way. From underneath, push in on the clips and ...

...bracket holds the alternator in place with a bolt. Loosen the bolts which hold the alternator to the upper and lower brackets, then rotate the alternator towards the engine to slacken the alternator ...

...bracket power steering pump lower rad hose heater hose then 4 bolts hold the water pump onto the front of engine not hard at all dont be afraid to do it clean the block with a new razor blade glue ...

...blade from fan clutch and remove fan shroud. -Remove fan clutch and water pump pulley from water pump. -Remove four bolts and one nut attaching A/C compressor mounting bracket to cylinder head and ...

...bracket from the top of the radiator and flip it back out of the way. Remove the top radiator hose from the radiator and push it back out of the way. Remove the 2 bolts on the top of the black fan ...

...blade screwdriver Large 10mm Socket Two3" extensions ( not one 6") 5/16 Gas hose approx 6"long(Aids in getting plugs out of Head) First time I did this1.25 hours. Procedure: There are four 10mm bolts ...

...bracket and the belt from the air conditioner compressor using a 9/16-inch socket and ratchet. Loosen the bolts on the power steering pump with a 5/8-inch socket, then push down on the power steering ...

...holds the hose into the nut that is screwed into the oil filter housing.  I doused the nuts with WD40, then removed the clip with a screw driver.  BE CAREFUL not to let the clips get away ...

bracket. Unplug the cooling fan wiring. Remove the air conditioning condenser mounting screws. Use care when working around the air conditioning condenser. Avoid bending the condenser inlet tube. Care

...fan section is also held in by a clip pry that out and slowly pull and wiggle it out. once its off there are four screws securing the dash/instrument panel, 2 screws on each side of the ...