2000 Nissan Maxima "needed bleed radiator" Questions

...bleed air out? Hello Michelle, my name is Michael and I too had air in the cooling system and this is how I got it out. I had to raise the front end to where the middle of the front bumper was about ...

...radiator cap, do so, and any air trapped in the system will bleed out. What you're doing is circulating the coolant and the air bubbles inside. The bubbles get lodged behind the thermostat and stay ...

...radiator after engine cools , careful with removing rad cap, bleed off pressure carefully, install pressure tester or have qualified person preform this test as well as a cylinder leakdown test... to ...

2001 nissan maxima overheating problem persists my temperature gauge was moving up and down (below 1/2 to 3/4). I had radiator replaced 8 months ago and fan motor replaced several months ago. so we ...

radiator an reservoir are full Couple of possibilities. Could be loose connection(s) on the temp sending unit or on the instrument cluster. Either power or ground. Or you could have air pockets in the

bleed the radiator system. Where is the bleed valve? Uncap the radiator, and unscrew the radiator drain plug. Normally, this drain plug is located on the inside bottom of the radiator, but models will

...bleed of the radiator system the problem returns, you may have a bad head gasket or other leak in your cooling system which is injecting air into the cooling system (radiator/water cooling

...bleed only one radiator at a time. Remember the system is a closed loop so you will eventually get all the air out and hit water. If this is the first time the furnace has been used this year you ...

bleed it? water pump good? thermostat good? if yes, then just run it with cap off until coolant is being pumped into radiator and top off as needed. I was told that you need to remove one end of upper

bleed the radiator. I feel like an idiot asking this question but I honestly cannot find it. Someone please help. That kind of car has a surge tank style cooling system. Adding water to it to fill the