2000 Ford Taurus "tank pressure sensor location" Questions

...pressure in the radiator fill tank just from trying to start the car. Is that norma The engine coolant tank was empty and I had to put in 1 1/2 gallons of coolant to get it up to level. Take off the ...

...a rubber hose. The power-train control module monitors fuel tank pressure through a tank pressure sensor. It opens the canister purge valve as necessary to keep this pressure within design

...tank and as you drive it cleans the system. Once the fuel system is cleaned via a tankful of cleaner & gas then the idle controller motor would be next on the list to be replaced. Good Luck ! Rich ...

...pressure regulator, see if you can stop the flow to the tank return side of the fuel rail where the regulator is. That will tell you the "deadhead" pressure of your pump. click here http www wshair ...

...cap it solved my problem. apparently when there is even the smallest leak in a pressurized tank it sends the check engine light on. Other than that, It might be an oxygen sensor. Hope this helps. ...

...pressure locate the fuel rail on the top of the engine, then look for the schrader valve it has protective cap on it unscrew it then screw on the tester and turn the ignition key on and observe the ...

...pressure, sterring rack might be seasing/leaking internally. HI. I will address all issues that you have mentioned below: 1. Fuel indicator malfunction - This is a direct result of a failed fuel ...

tank pressure (FTP) sensor, canister vent (CV) solenoid, fuel vapor control valve tube assembly or fuel vapor vent valve assembly] seals leaking. CV solenoid partially open when commanded closed. EVAP

tank. O I had this issue but it was dangerous at lights or stop signs because when I hit the brake it stalled and kept in going. It can be fuel filter, iac, or a major vacuum leak like the foam in the