You need to have the transmission control module scanned for codes. PO700 is just a code in the ecm to tell you that there are codes stored in the TCM. Clint i have a po841 code with 4 probable causes
po700, po731, po841, and p1776 Well looks like I have answered this question before for someone else. Code 700 is for a problem with the transmission control module, 731 is incorrect first gear ratio,
Question about Chrysler Cars & Trucks
po700 po841 po846 po732 gear2 inc ratio po731 inc ratio po733 pulled out solenoid and had a metal shaving on the magnetic end helpplease P0700 Transmission Control System Malfunction P0445 Evaporative
...po841 fault code The transmission slips into neutral while driving in Drive or Reverse. The dcs gives fault codes: PO732, PO700 and PO84. What can I do?1 Hi Brian, Seems you have a problem with the ...
po841 po700 and p1776 i know its a transmission problem but i need to know if i am going to have to replace the transmission. You don't replace a transmission Worse case you remove and rebuild Go to a
...po700, po731, po841,p1776 my car has been in 2 transmission shops no help, after my car reaches operating temp, when slowing down it slips into first gear and wont come out, i can restart car and ...
...po700 po340 po841 p1776. what do I need to fix or is it just my input n output speed sensors Code 700 means you have a problem with the transmission or the control module. Code 340 is for the cam ...
...PO700, PO731, PO841 and P1776. Please advise me about this. Thanks, Subhasis P1776 is the only code you need to be concerned with it a problem with the solenoid back (not the transmission valve body) ...
Question about Dodge Stratus
...PO700 and PO841. the 700 code i was told it was the input and output sensors.i had those changed a month and a haft a go. now they are back on and the po841 is on were is the 841 sensor located the ...
509 questions posted
Usually answered in minutes!
1,417 Questions
1,121 Questions
924 Questions
772 Questions
621 Questions