1995 Buick LeSabre "remove powerer steering pump" Questions

steering pump pulley (which was VERY difficult to remove) be malfunctioning and cause the belt to just slip over it instead of turn it??? Thanks, Chris very possible that the pump has failed (seized )

...remove the cap and check there If you hear such sound, it means your power steering pump is bad. Until you replace it, the noise will not stop. If you check your power steering oil container you will ...

...steering pump is in the front of the engine. You will see the serpentine belt on the pulley and it will look something like htis picture. The pump has a resevoir with a cap on top which is removable ...

...steering pump and move it out of the way . Anyone have any thoughts on this ? disconnect the engine mount on the side and carefully raise that side of the engine, also remove the water pump pulley, u ...

steering pump ? Im guessing you have the 3800 engine if so the power stearing pump is on the passenger side below alternator and pulley tensioner . you will need a 13mm socket to remove the pump bolts

...water pump 1 bolt left behind power steering pulley is there a trick of the trade or remove pump? you have to remove p/s pump need to put socket in hole on p/s pulley to get to bolts to remove ...

...remove two of the power steering pump bolts and rotate it out of the way to give you the clearance to get the last water pump bolt out. Make sure you get a new gasket and clean the old gasket off ...

...remove and replace it THE POWER STEERING PUMP PULLEY --- ARRGGH...Not a problem. The power steering pump is held by two bolts. Use a socket and remove the top bolt and loosen the bottom bolt. Be ...

...REMOVE CAM SENSOR If this is a 3.1L or 3.4L you must get the power steering pump out of your way the cam sensor is located on top of engine block under the p/s pump. Remove bolt with 10mm socket and ...

...remove the power steering pump and pulley. Use a 13 mm socket and remove the two bolts that hold on the pump assembly. They are normal bolts that turn counter clockwise to remove. You don?t need to ...