1988 GMC Suburban "spark" Questions

had weak spark and now no spark to plugs COIL PACK IS YOUR PROBLEM HERE Try this, (for coil ignition systems).Get a volt meter (inexpensive) or a 12 volt tester.Test for primary power at coil ( the ...

...gas cap and the battery. I do not know what else to check. Lets start at the beginning. Do you have spark to the plugs and normal fuel pressure ? It must have lost gas or spark to suddenly die. That ...

what kind of ac spark plugs should i use? Use AC Spark plugs, but you'll get a selection of them at the auto parts store, ranging from standard AC Spark Plugs to the Platinum Tipped Spark Plugs. Try ...

...died 1996 surburban died sunday. won't start, tries to, battery wears down fast, seems to be no spark, my husband tried with the spark plug wire, i am a cancer patient and lots of bills, can ...

won't start new engine no spark replaced engine with new engine new wires new distributer no spark If it turns over fine, check the crankshaft position sensor, and wiring. I have had two no sparks ...

1993 Chevy Suburban will not start and has no spark I changed the distributor cap, rotor, spark plug wires, the distributor with module, IAC valve and spark plugs and the vehicle ran until I bleed my ...

I want to know how to change spark plugs in my 93 suburban What tools will I need etc. You will need a spark plug wrench and a spark plug gaper to make sure the plugs are gaped properly.

1993 Chevy Suburban 1500 has not spark and won't start I changed the distributor cap, rotor, spark plug wires, the distributor, IAC valve and spark plugs and the vehicle ran until I bleed my brakes. ...

...and flywheel The starter is doing its job if motor is turning. To fire an engine you need fuel and spark, You can remove a fuel line near the delivery to the intake, get a gas proof container, like

...mount. Does it start right back up, or does it need to cool down a bit first? I would check for spark on a spark plug wire when it shuts off. If no spark, it could be the crank position sensor.