1996 GMC Sierra "truck starting hard immediately shutting" Questions

Ad

...truck ran poorly afterwards. Had a prussuer test done pump determend pump was no good. Put in another ran good for 2 days started running poorly hard to start no power. 2nd fuel pump. So i figure ...

Ad

immediately. Sometimes when car is parked on an incline it is hard to start. Today while driving at 35 mph the engine died. The car started immediately after stopping. Fuel filter has been changed but

Ad

Question about GMC Sierra

1 Answer

...97 oldsmobile aurora has a bit of a hard time starting on a chilly morning after about 7 turns of the key it jumps over n starts fine immediately after shutting it down temputer sensor needs ...

...hard and engine light comes on, then I shut off engine and immediately re-start and it runs fine, engine light off. I have replaced igniter and coil to no effect. Can anyone help? You have 2 codes, 8 ...

...immediately cuts out and engine shuts down when I take my foot off the gas. Could it be a loose throttle cable affecting my idle? It could be related to several engine management components, it is ...

...truck or a diesel engine). Drove for another 2 kms and turned off the engine. Started the car after 45 mins. Sound was still there and drove for about 1 km and the sound became louder and then the ...

Question about Cars & Trucks

1 Answer

...immediately shut off. then will not start. the fuel pump works well when you send 12v to it. the codes say the ecm is not getting a tack signal. would this be a bad crank angle sensor. it is in a bad ...

...truck is running. Hard to start and when shut off, pressure bleeds off almost immediately. Nothing wrong with fuel pressure should be fine. Pressure should not bleed off when vehicle not running that ...

...Hard to Start or No Start Scan Data for Starting Problems I would think the crankshaft position sensor or ignition control module could be the problem , but without testing ,that's just a guess

...brights, washer fluid comes out. this all started immediately after i hit the lever pretty hard with my hand when swerving to avoid hitting something. It sounds like your multi funcion switch is ...

Not finding what you are looking for?
1996 GMC Sierra Logo

682 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1998 GMC Sierra
1998 GMC Sierra

987 Questions

1997 GMC Sierra
1997 GMC Sierra

847 Questions

2000 GMC Sierra
2000 GMC Sierra

676 Questions

1999 GMC Sierra
1999 GMC Sierra

601 Questions

1994 GMC Sierra
1994 GMC Sierra

604 Questions

Top GMC Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...