...2500 5.7l vortec, won't start, fuel pump works, tried using starting aid and nothing, hooked up a scan tool, and no errors came up, could it be the crank position sensor? or the distribution centre ...
1997 GMC K1500 4x4 5.7 ex.cab SFI injection system fuel pump died replaced it truck ran poorly afterwards. Had a prussuer test done pump determend pump was no good. Put in another ran good for 2 days ...
...2500 to keep the vehicle running. i have recently just replace and check fuel pressure 55 psi ...ok so no spark at spark plug . crank good no spark. Removed ignition module and all three coil packs ...
...1997 Chevy K2500 keeps dying. I think it is a bad connection on the positive, but when the connection breaks, the truck dies. I think it needs an alternator too, but this has been going on for months ...
...2500 5.7L 4x4 I replaced the fuel pump about 6 months ago along with the filter. Damp rainy weather makes it mist. Plugs and wires are good. Cap and button are good. Now the truck will struggle to ...
...1997 2500 4x4 5.7lt motor auto Hi, first check for sparks by pulling a plug wire off and sticking a phillips screwdriver in the boot. Lay the screwdriver/boot down on the engine with the screwdriver ...
...1997 Chevy 2500 pickup with a 5.7 liter V8. The issue that I am having with it is there is no power when accelerating. If I press the gas hard the rpms drop and the tuck will stall. If I press slowly ...
Question about Mazda Cars & Trucks
1997 Mazda b4000 runs smooth then starts skipping and jerking. what would cause this? In drive...set brake ...shift to Drive and hold car with brakes and run engine up to 2500...(no more that a few ...
...1997)
KA24E
SOHC 12valve head, hoohoo a nice chain drive cam.! no stinking belts. to snap and bend valves.
if compression over 150psi
check fuel pressure. if starting fluid test ...
682 questions posted
Usually answered in minutes!
987 Questions
847 Questions
676 Questions
601 Questions
604 Questions