2002 Ford Explorer Sport Trac "brake turn signal combine wire" Questions

Ad

Question about Ford Explorer Sport Trac

3 Answers

Brake lights, Front Turn Signals not working I have the oddest combination of problems. My brake lights don't work. My front turn signals don't work. My front emergency lights don't work. My turn ...

Ad

Question about Ford Explorer Sport Trac

1 Answer

...brake light and rear turn signal (one bulb if combined) and also rear center high mount brake light. If the left turn signal has a slower speed than the right turn signal, this is a symptom of a bulb ...

Ad

Question about Ford Explorer Sport Trac

2 Answers

...brake light circuit and turn signal or combination switch share the same circuit.if brake lights dont work you have to replace turn signal switch or combination switch. go to the trunk probably the ...

...turn signal or flashers. I have an electric brake controller installed which was disconnected when I tried the new Combination Flasher. A few weeks ago I did have some loose wiring problems with my ...

brake lights and turn signals went haywire brake lights quit all together turn right hand turn signal all four flash Check your ground wire, it's usually somewhere around your left taillight Most ...

...brake switch at the pedal does have six wires, but none go to the multifunction switch (on the steering column). The white wire with tan tracer goes to the combination flasher to be integrated with ...

...turn signal input (green wire) and ground (black wire). If all of the brake lights are inoperative, chances are the brake switch has failed or the power-supply fuse has blown. This is because it is ...

Question about Ford Explorer Sport Trac

2 Answers

...a single contact (1056) bulb in place of a 1157, which creates a short from brake/turn-signal back into the tail-light circuit. I do have a 1994 Dodge Dakota. Ground is on the left fender side ...

Question about Ford Explorer Sport Trac

1 Answer

...turn signals, high beam, hazard lights and apparently the 'smart' Ford designers linked the rear brake lights to it. Could be a contact that is oxidized. I repaired mine. I may have one lying around. ...

Question about Ford Explorer Sport Trac

1 Answer

...the wiring converter. It converts from seperate brake light/turn signal as used on many late model vehicles to allow a combination light (like used on trailers) to work. Check ground wires

Not finding what you are looking for?
Cars & Trucks Logo

565 questions posted

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...