2002 Mazda MPV "remove intake" Questions

...remove the air intake hose to the engine, hold the idle high so the engine won't stall, then spray the can of cleaner into the intake while keeping the engine running, use at least 1/2 the can, shut ...

...Remove the intake manifold. Book time is about 2.5 hours. No very difficult if you pay attension. Remove the coil pack and you can get to all 3 plugs. You DO NOT need to remove the intake on the 2000 ...

mazda mpv 2000 WHERE IS LOCATION THE P1512-IMRC-BANK 1 STUCK STUCK,AND P1250, Possible problem is carbon build up in intake runners..remove top intake and clean runners..

...remove the intake plentum to gain acsess to the rear plugs. First remove plastic cover from top of engine, remove intake hose to throtle body, unplug electrical connections to sensors on plentum, ...

...remove the intake plenum, remove the ignition coil, and then you'll have access to the sensor. You'll need a sensor removal socket. If the socket slips around the hex of the sensor, then you'll need ...

intake manifold Drain the coolant, remove the exhaust pipe(s) from the exhaust manifolds, remove heater hoses from heads, remove, rocker covers from the heads,remove cam belt covers and cam belt, undo

intake if you're going to remove it. This is not a simple fix and shouldn't be attempted unless your well versed in the workings of a modern engine. You'll save yourself alot of irritation if you take

...If air escapes through either the intake or exhaust, the valves are bent. Remove the head and inspect. Note: This problem is more common than you may think and the valves are almost always

...intake to remove valve covers. I also replaced the 2 vac lines going to the rear of the intake. because they were brittle. the car ran fine for 2 days. It then just spit and sputtered and died. The ...

it has a nosie coming from the right side of the motor If you are referring to a squealing noise on the drivers side, this is a common issue with these vans. My sister has one and it did the same ...