Replace starter and battery 1999 Mazda 626 still won't start Won't start or engine won't turn over and try to start?
...won"t start, just makes a clicking noise, used jumper cables got it started but when I shut it off would not start back up Hi Barb, sounds likes like your starter is bad,the way to test is to remove ...
...start my 97 mazda 626 it clicks but won't turn over and other times it starts.. What's the problem? It sounds like your starter motor is going out. More specifically the solenoid on your ...
It cranks over real good but it just won fire up all the way,its has spark and commpresion, wen it ge a little gas in it almost starts Is it getting enough fuel ? If so, then check the timing
...won't start. I tried to jump it and it still wouldn't even turn over. Could it be a belt? No if its not doing anything at all it could be a bad wiring harness or if ur lucky a bad
starts perfectly but won't idle Starts every time then stops after about seven seconds every time. Runs great when revs are about 1800 or higher. Have checked air flow meter resistances and all ...
...won't start. it turns over but acts like it isn't getting any fuel. check relays/fuses first then the pump if you know how to test it the pump is easy to test locate any fuel line unplug it ...
mazda starter switch in park Car starts in neutral, but won't turn the starter in park. Battery is fine, its a1999 6cyl with automatic. Intermitent problem You need to replace and adjust your ...
my 95 626 with a 2.0 4 spd won t pass smog. i changed plugs, wires, distributor,cap and rotor. when cold it will idle,but as soon as it s warm it starts idling rough and sometimes will die.it won t ...
...won't start. I have a 1997 mazda 626 2.0, it was running rough. I replaced fuel filter and changed oil. That did not fix the problem so I thought I would add fuel injector cleaner and replace spark ...
640 questions posted
Usually answered in minutes!
544 Questions
356 Questions
269 Questions
277 Questions
227 Questions