1992 Mazda 929 "head" Questions

what are your changes of having of taking the blown head gasket to machine shop and repaired and putting back on motor Cylinder head gaskets (the thin copper layer between the head and block) are not ...

...pour out the exaust pipe n the radiator cap n the over flow bottle, is this a manifold gasket or a head gasket or something else sounds like a blown head gasket, time to tear that engine down and ...

car is overheating. have replaced all cooling components. what up? COULD BE LEAKING HEAD GASKET.CHECK ENGINE OIL IF OIL LOOKS LIKE MILK SHAKE YOU GOT A LEAKING HEAD GASKET.

...lift and that is were the coolant was coming from, on the back side of the right(passenger) side head. I am changing the head gaskets. It is as far as I could see the only place it could leak ...

To change the cylinder head gaskets do you need to take the whole engine apart? not the whole engine just the top end, you will need a manual, take the head to a shop for inspection, new bolts and ...

I have a 1992 Mazda 929 with the passenger side low-beam headlight out. What is the easiest way to access the bulb to replace it?I realize this is elementary to most. You'll need a 10" socket, a ...

...water pump on and the water is not coming from there. It sounds like to me that you have a blown head gasket. Possibly even a warped head. I just ran into the same problem. It was a small water ...

WHERE CAN I HAVE AN OIL LEAK FROM UP TOP the heads valve cover and is your cap tighteened all the way

i turn the head lights on and the dash panel lights will not come on.. and nothing changes when i use the panel bright &dimmer switch Check your brake lights if they do not come on you have blown ...

...as you still have a problem Does it run okey other than just hot? Does it use coolant ,as a bad head gasket? Is the radiator clogged? You missed ...