1992 Mazda 626 "bracket alternator" Questions

...bracket or strong screwdriver to slide the alternator back to make the belt tight again, belt should not bend more then 0,5 cm or 1/4 of the inch when pressed with fingers, tighten the bolt on the ...

...bracket off. Take the alternator pass the firewall to underneath the air intake mannefult and lift out. NB: WATCH OUT FOR WIRES!! Return the same way. Hope it help. Might have to take out drive axle, ...

alternator,you will probably have to loosen or remove the bolts holding it on to the bracket, it makes it easier to get the belt off, pay attention to how you remove it, then get it tested, if its bad

...bracket that bends at higher revs that needs to be replaced or strengthened. Hope this helps. 2000 mazda protege alternator/water pump belt keeps breaking and needing to be replaced i have a mazda ...

...Alternator bracket bolts, if necessary Ignition wire pin-type retainer from the generator bracket, 4.6L engines Drive belt from the alternator pulley Electrical harness connectors at the alternator ...

...alternator bracket and intake depending on witch alternator you have the higher amperage one has a larger diameter and only can be removed by moving the intake over to the right.All thoe i did remove ...

...alternator bracket bolt and remove the alternator support bracket from the engine. Remove the alternator from the engine and disconnect the electrical leads. To install: Install the alternator in ...

...alternator adjusting bracket bolt and adjusting bolt. Remove the alternator belt. Remove the bracket and mounting bolts. Remove the pivot bolt and nut. Lift the alternator from the vehicle. When ...

...alternator bracket and remove bracket 10. Remove attachment bolts and alternator from vehicle 11. To install reverse proceedure 12. Fill radiator and overflow bottle 13. Bleed air from cooling system ...

...alternator bracket bolt and remove the alternator support bracket from the engine. 9. Remove the alternator from the engine and disconnect the electrical leads. To Install: 10. Install the alternator ...