1990 Mazda Protege "3 cooling system problems" Questions

...3: total cooling system failure and overheat and you turned the engine cooling to steam , called boil over. did you? if you boil it over and keep driving, say goodbye to the engine. sorry of all this ...

...3. Clogged up radiator. 4. Coolant system not staying pressurized. Head gasket or coolant leaks Best to have an auto shop look at it to give a proper diagnoses of the source of the problem. When the ...

...1. coolent level full? 2. cooling fans working? 3. when did you service your cooling system last? Cooling systems need changed and thremostat need to be replace on a regular basis. (every 24

...is a serious overheat perhaps its ok as it is if no one has changed any hoses and put in the wrong way then check 1 first then 2 then 3 is the cooling fan coming in al lthe time?thermostat is ...

...cooling fan #2 and #3 relays for 6 seconds. The 6 second delay ensures that the cooling fan electrical load will not exceed the capacity of the system. The PCM will complete the ground paths for ...

cooling system pressure check. After locating the source of the problem attend as required. Areas of interest are 1) The radiator. 2) Radiator pressure cap. 3) Broken or cracked hoses or leakages from

...3. If the cooling fans are only being triggered intermittently when the coolant reaches the predetermined temp then you could have the same symptoms. When the overheat condition shows up your cooling ...

...3. Cooling fans not working and if so the cause needs to be tracked. Check that your fans are kicking in. If the engine is overheating the fans should be running because they will switch on when the ...

...3 months ago,started overheating yesterday after i checked my coolant level The most common overheating problem with the Northstar engine is a blocked purge line. It's job is to purge air out of the ...

...3 1/2 inches long and about 1 1/2 inches wide with like a pressure cooker top on it but without a cover. Do you get what I mean? The part that broke off is the cooling system purging valve housing. I ...