1983 Mazda RX-7 "bleed clutch master cylinder" Questions

Ad

...bleed a clutch for a 1985 mazda rx-7 my clutch in my 1985 mazda rx-7 sticks down I recently added dot3 fluid to the clutch fluid and now it sticks for some reason so I thought that there might be air ...

Ad

...bleed the clutch at the slave cylinder if it will not build up enough pressure to release the clutch. check to see if you have fluid first if it does then pull on your clutch pedal and pump it for a ...

Ad

Question about Mazda RX-7

1 Answer

...bleed your clutch hydrolics, and after a few days it starts sticking again, you will need a new clutch master cylinder and slaves cylinder. About $70 at autozone. Make sure when you bleed it you get ...

clutch gave out on me again. Its not leaking, it was bleed my question really is did i install the rebuilt parts properly? can you give me a step by step installation process on the rebuilt kit on the

...clutch Master Cylinder in found under the hood directly in front of the driver. It the one that is up higher, the other one is the brake master cylider. Start here. Check your fluid level, if it is ...

Question about Mazda RX-7

2 Answers

...clutch reservoir is low on fluid and has leaked all the fluid out so check that first if the reservoir is empty then fill it with brake fluid. Then it will need to be bleed if you don't know how it ...

...clutch remove and pull old unit out bench bleed new master by filling and pressing in on the piston of the master cylinder. if you dont have a hose fitting dont bench bleed bleed it in vehicle( this ...

clutch slave and master cylinders, and bleed well. I've also had this happen. possible problem is a bad slave cylinder or needs bleeding or a bad master clutch cylinder Pull back the boot on the slave

...slave cylinder line fix leaks bleed the clutch mastercylinder make sure its full of fluid when bleeding if clutch mastercylinder run dry while bleeding you have to repeat bleeding

bleed screw, then release clutch. Repeat this procedure until you have removed all air from the system and the clutch pedal is firm. Keep an eye on the fluid level to avoid sucking air into the system

Not finding what you are looking for?
1983 Mazda RX-7 Logo

62 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1985 Mazda RX-7
1985 Mazda RX-7

-14 Questions

1988 Mazda RX-7
1988 Mazda RX-7

66 Questions

1987 Mazda RX-7
1987 Mazda RX-7

-18 Questions

1984 Mazda RX-7
1984 Mazda RX-7

-16 Questions

1990 Mazda RX-7
1990 Mazda RX-7

34 Questions

Top Mazda Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...