2004 GMC Envoy "xl 6" Questions

and it seems fine don't know what the problem could be Envoy/Trailblazer/Ranier/Ascender vehicles do have a fuel filter. Mine Envoy XL, 6 cyl.) is on driver's side, inside chassis under passenger door

6 months and the vehicle is totally useless to me. I truly would appreciate any pertinent information that you can provide... Thank you for listening and any advice you may have to provide.. Make: GMC

...xl V6 L Dexron 6 is the best one to use, and is much better than the old Dexron 3, all the new GM vehicles use the 6, and is BACK compatible, meaning you can add the 6 to the 3 with no problem. Don't ...

XL (6 cyl). I've owned it for 6.5 years, it is 10 yrs old and I have never had a tuneup. It seems to hesitate a bit How do I know when I need a tuneup (spark plugs replaced) on a 2003 GMC Envoy XL

XL SLT 6 CL 4.2 4X4 Check the trany fluid with car on and hot,, Trany may be bad. or it could just be a cylinoid Sounds like you need to have your transmission serviced. One thing that you could do to

...6. Remove the left rear door sill panel. 7. Remove the lower seat belt anchor bolt. 8. Remove the auxiliary power outlet from the trim panel. Release the five screws that retain the rear quarter trim ...

...XL 6 cylinder. I had to disconnect the battery and alternator. All was reinstalled,truck runs fine but when I turn on the a/c the truck turns off and idles roughly. Sounds like ac compressor is ...

XL 4wd 6 cylinder You could try and drill out the old plug.Start with a small drill bit then go larger.Dont get into the thread! OR if you can take the rear plate off and drill it from the inside even

...XL 2004 GMC Envoy XUV 2002-2004 Oldsmobile Bravada with Electronic Shift or Active Transfer Case (RPOs NP1, NP4 or NP8) This bulletin is being revised to add Subject information and change the labor ...

...XL model there it will be different for the rear passenger compartment fuse panel which I did not include. I did include if you had a 6 or 8 cylinder engine for the under the hood fuse panel because ...