Question about GMC Sonoma
door lock knobs. Close all the doors. • Procedure B -- Close all the doors. Use the key or the power door lock switch in order to lock the door. The doors must be closed prior to locking the doors for
...but didn't seem to help. I have tried a seldom used key, same problem. Passenger side okay. Thanks. need more lube and heated garage and to operate door lock plenty of times to free up binding ...
...door lock out of the door (not too difficult,) and take that into a key maker, like they have in any hardware store. well an ignition key is a double sided key so the only way would be to find ...
...lock knob while unlocked. Then if that is all that looks lie is holding it you will need a screw driver to pry the edges with, They just snap in to the door. just work your way around until you have ...
...door back on frame hinges and install pins, next slide lock washers on pins to hold pins. last is the spring. you will need a spring tool, you may rent one at auto parts store. hope this helps good ...
...lock and unlock the drivers door with the key, if that doesn't reset the system try this, if the following reset doesn't unlock the system u still have a problem and the dealer needs to rescan the ...
door locks and ignition issue Hi, my 96 GMC Sonoma won't start when the door locks don't engage. I don't have power windows or anything like that. Any help you can give would be much appreciated. ...
...Door Lock Receiver (RCDLR) On the left I/P sound insulator The location of the keyless remote module can vary depending on the make and model of the vehicle. In most cases, it is located in the front ...
618 questions posted
Usually answered in minutes!
359 Questions
270 Questions
269 Questions
249 Questions
241 Questions