1996 GMC Jimmy "blower speed switch" Questions

blower speed switch. Recommendation only.. Do a voltage check at the switch out connector before replacing or digging anymore. If you have power at the plug going to the fan resistors then check for a

...a new blower motor and a new blower motor speed control resistor to fix this right, about $200 for parts and 2 hours labor time, so in my area about $400. my local labor rate is $100-125 per

...switch to blower motor.   check wire harness connector at resistor, it should have six wires five power wires that corralate with the five settings on switch, so in each switch setting one ...

blower resistors are most likely burnt out and need to be replaced. It could also be the speed switch but since it works in high also it's unlikely. I'm not sure if that's related to the other problem

...speed control is broken If you mean the fan switch is not turning anything, you'll have to replace the blower switch in the dash. If the switch turns but nothing happens, you'll have to check the ...

...SPEED CHANGES ON THE SWITCH ... BUT NEXT DAY EVERY THING WORK...AND AGAIN..SO WHAT IS THE PROBLEM AND HOW MUCH TO FIX IT???? MY CAR IS GMC 96 JIMMY SLT HAS 250 KM 4X4 it's either your blower motor ...

speed control switch for the climate control fan motor on my 1996 GMC 4x4 mid size Jimmy operates just fine on the low and medium settings. When moved to the high setting the blower fan shuts off. The

...blower resistor on my 99 gmc jimmy its still blowing on the same speed as it was. could it be the relay? Could be the switch.Can you check for voltage on the terminals for the resistor ? The blower ...

...heat sink/plastic/alluminum .This part is cooled by the blower motor,and supplies the speeds for the fan that you select with the fan speed switch.If I caan help,let me ...

blower motor fan speed control switch When I turn the fan on to warm the truck there is a high pich squeal. If I shut the blower off then turn it back on, it sometimes stops the noise and other times ...