2002 Ford F250 Super Duty SuperCab "ft lbs nm converter" Questions

Ad

Question about Ford F-250

1 Answer

...ft. lbs. (88 Nm) for the diesel; 50 ft. lbs. (68 Nm) for gasoline engines. Remove the transmission jack safety chain from around the transmission. Position the No. 2 crossmember to the frame side ...

Ad

Question about Ford F-250

1 Answer

...ft. lbs. (54 Nm) with 9.5 in. 3-lug converter 55 ft. lbs. (74 Nm) with 9.5 in. 4-lug converter 55 ft. lbs. (74 Nm) with 10.0 in. 4-lug converter 270 in. lbs. (31 Nm) with 10.75 in. 4-lug converter I ...

Ad

Question about Ford F-250

1 Answer

...Transaxle mount and torque the bolts to 65-80 ft. lbs. (90-110 Nm) Torque converter and torque the bolts to 34-39 ft. lbs. (46-53 Nm) Flywheel cover and torque the bolts to 72-84 inch lbs. (8-10

...ft/lbs but the FSM covers this, as does alldata.com since only 1% of post tell engine, you win today. Transmission. Tighten the large bolts to 56 ft. lbs. (76 Nm) and the small bolts to 69 inch lbs. ...

ft. lbs. (60 Nm). Engine mount to the bracket and front crossmember. Torque the bolts to 30 ft. lbs. (40 Nm). Lower the engine into position and make certain that the mount locator tab is fully seated

Question about Ford F-250

1 Answer

...ft. lbs. (50 Nm). Torque converter cover Starter electrical connectors. Torque the positive battery terminal nut to 84 inch lbs. (10 Nm) and the "S" terminal nut to 20 inch lbs. (2 Nm). Lower front ...

...ft. lbs. (18-22 Nm) in the sequence illustrated. Raise and safely support the vehicle. Position the Y-pipe assembly using a new flange gasket and install all the retaining nuts and bolts loosely. ...

Question about Ford F-250

1 Answer

...ft-lbs (43 Nm) Connect the battery positive cable to the starter Torque nut to 12 ft-lbs (16 Nm) (1997-2000); Torque nut to 89 in-lbs (10 Nm) (2001-2005) Connect the starter motor S terminal wire ...

...ft/lbs 2.4 liter the other 5 engine there , are not the same so no engine told. the book TC page says, installed I recommend in all cases that you buy the service manual real. used. back in 1990 all ...

Question about Ford F-250

1 Answer

...ft. lbs. (20-41 Nm). Fig. 1: Front exhaust pipe connection common on vehicles with the catalytic converter not included All clamps should be tightened to about 18-25 ft. lbs. (24-34 Nm). Do ...

Not finding what you are looking for?
2002 Ford F250 Super Duty SuperCab Logo

1,473 questions posted

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...