2000 Ford Expedition "spark plug broke head" Questions

...spark plugs, it is possible but only if the plug broke off, or blew out of the engine. You say engine is running OK but a V8 can do that on 7 cylinders. Also you may be describing the beginning of a ...

...spark plug boot or tube is our King instead of the spark plug I had two similar situation on a6 cylinder car one of them the piston ended up touching the spark plug and broke the gap another one was ...

...you use the spark plug removal tool from Lisle? Never had a glow plug break off but alot of 5.43v fords. It kinda drills in to the porsilen on a spark plug. maybe it would catch the glow plug as

...spark plug stuck inside head I have a 1988 Ford Bronco with a 351 Winsar V8, 4-speed. While changing out the spark plugs, one broke on me while trying to get it out, and half of it is still stuck in ...

spark plug the wire of the spark plug broke off and all theirs left is the head . how do i take it off ? and when i change some of the spark plugs theres oil on there is . do i have a big problem ? ...

Spark plug change on 2002 Chevy 2500HD just had the spark plugs changed at the dealership (don't start). was told that they had to lossen the bolts on my exhaust manifolds to access the plugs ...

...spark plug socket on it. Unscrew it all the way until it is loose. I am assuming you have the engine where the spark plugs are recessed in the head and difficult to reach. What you need, once the ...

...plug hole. if the spark plugs have been cross threadded at any point chances r that the plug hole is damaged and in need of either a okug thread insert or best way is to o pull the head and have a ...

Spark plug broke in head. How do I remove it? I was trying to change spark plugs. 1] place block of wood over area where plug broke off and turn egine over to remove the electrode from the plug. 2} ...

spark plug broke off bottom of dioad I pulled the plugs on my 2006 Kia Rio 5 when I pulled #2 plug the bottom was broke off and must be on top of the cylinder, but I've used a magnet and an ...