2005 GMC Canyon "switch" Questions

...and no change still does not work. Start with the simple and check the fuses and the Stop lamp switch. Check your brake lights, if they're not working, the cruise won't work either. If they're ...

no power windows or door locks till you warm up drivers master switch with heat gun Hello there!, You might have moisture in the switch, You should buy a can of wd-40 if you do not have it already and

clutch start safety switch problems Push clutch in, still won't start ok before you change the switch try taking the wire off the switch then with the car in neutral jump the wires and try start your ...

My 2005 GMC Canyons blower motor works only when the switch is placed on the highest position. Is it the switch, or the blower motor, or is there something that I am not thinking of? I believe your ...

..., an testing is how to diagnose . Not guessing an throwing parts at it . DTC B2725 The accessory switch circuit consists of 4 modes. The transfer case shift control module supplies 5 volts to the ...

Left power window not working, power locks not working from either side, can unplug at master switch and jump wires with a battery and get window to work and power door locks to work. Also when you ...

Drivers door window switch does not work, but passenger does on same switch. Also drivers side door lock switch not working. Checked fuses, all were good, disconected battery and re connected no ...

...door ajar light stays lit when all doors are shut tight Hi, This seems that either of the door switches is/are faulty. Try pushing the switches fully on each plunger switch on each door ...

...or something plugged in where it shouldnt be.....Or wrong size fuse..You have a brake light switch attached to the brake pedal which is common to fail.....also brake light bulbs and fuse ...

Dash light sometimes fail to come on at night hello you could have a bad light switch, and the rheostat that operates the dash lights may not always work if weak connection.also the wiring may have ...