...Idle Air Control System RPM Lower Than Expected and says Clean Throttle Body and Set Idle Adaptation This problem is commonly caused by a dirty automatic idle speed control valve and throttle valve. ...
IDLE CONTROL SYSTEM CODE PO506 I HAVE A 2005 GMC CANYON I-5 220 HP AND AM GETTING A TROUBLE CODE PO506 IDLE CONTROL SYSTEM - HOW DO I FIX IT WITHOUT GOING TO A DEALER - PLEASE KEEP IT SIMPLE IN PLAIN ...
...the purge throttle valve located? theirs a part the purge throttle valve wich affects idle, sirging in engine with hesitation when accelerating and also check idle air control valve check air ...
Fix code 506 po 506 computer detects idle is to low.may have bad idle air control valve or needs cleaning,also make sure throttle body is clean.
the idle is low and flexuates up and down and the check engine light came on. the idle air control valve needs tested and replaced
...idle control valve be cleaned on my 2004 gmc canyon? if so, where is it located and what is the correct procedure? thanks not recommeded to clean .....replace ..is the name of the game on ...
...idle. Autozone Diagnostics gives code:P0506. Idles low if at all. Could be: A vacuum leak An air restriction in the intake air path or exhuast A faulty positive crankcase ventilation (PCV) valve ...
control module) detects an engine idle speed that is lower than the desired (pre-programmed) RPM. Causes: A P0506 DTC trouble code may be caused by one or more of the following: · A vacuum leak &
Idle Air Control (IAC) Valve Removal Disconnect battery ground cable (14301). Refer to Section 14-01 . Disconnect the engine control sensor wiring (12A581) from the idle air control valve (IAC valve)
...Idle air control actuator - Wikipedia, the free encyclopedia https://en.wikipedia.org/wiki/Idle_air_control_actuator An idle air control actuator or idle air control valve (IAC actuator/valve) ... ...
448 questions posted
Usually answered in minutes!
178 Questions
146 Questions
43 Questions
13 Questions
14 Questions