1997 Mazda Protege "brake light" Questions

...the time unless it is cold. When I release the hand brake the light goes off until I get to the end of the driveway. Any suggestions Check the brake fluid level if it is low it will turn the light

...brake light switch which is located on the brake pedal itself.  Should cost around $20 at autozone and is pretty easy to change out yourself.  Thanks for rating my response and for using ...

...Check the Instrument/Brake light fuse. If you also don't have brake lights, the problem should be the fuse. If your brake lights work, then it's probably the instrument light dimmer, adjust

brake tail lights stay on when car is shut off Brake switch behind the brake pedal arm There's a switch on the brake pedal arm that controls the brake lights. It may need to be adjusted or replaced.

...brake light work and the rear the side lights work, and the light over the license plate works, but the main central panel of lights does not come on, whether or not I press the brake. Is it a fuse ...

...third window light is working. I replaced the brake switch but thats not the problem. Is there a seperate fuse somewhere I may be missing. Any help would be much appreciated. have u guys tried

...brake light both side fuse ok can you help e mail [email protected] thx check the actual globe is not blown I lived through this, Right hand brake light broken. Took out bulb and bought new ...

brake light switch and checked the bulbs. All are in good order. What am I missing? Is there a brake light control module in the mix? I have read about that component on other brake light systems, but

brake light switch. The brake light switch is by the pedal and when the brakes aren't applied there should be power going in but not coming out. If you got power coming out replace the switch. There's

...sure the brake light switch is working. It should be attached to the brake pedal up high under the The come loose or a clip can brake and then the switch doesn't open or close and the lights don't ...