2003 Ford Crown Victoria "changing master cylinder 03" Questions

Ad

Question about Cars & Trucks

1 Answer

changing the master cylinder again thinking i had a faulty master, its still the same... i have gravity bled the brakes, and have power bled them... what would cause it to stay spongy? Have you driven

Ad

Question about Cars & Trucks

1 Answer

...the hose?thanks in advance, nevermind the video This may be caused by low fluid in the master cylinder. Try topping up the master cylinder with fresh brake fluid that's recommended for your

Ad

a 2001 and a 2002 slave cylinder and clutch master cylinder interchange with out any modifications? For a 2002 chevy blazer! You wont have any problems changing them. I think 99 to 03 are all the same

Question about Ford Crown Victoria

1 Answer

...came on at the same time. Have a 03 4runner 4.7 I Changed spark plugs few weeks ago...did i mess anything up??? check to see that the two ps switches on the brake master cylinder are plgged in ...

...changing the master cylinder? what else could b the problem after changing the rear shoes and the drums ans changing the front pads and changing the master cylinder the pedal still goes to the floor? ...

Question about Ford Crown Victoria

1 Answer

master cylinder,but same thing.I have to pump the brake for the car to stop,now this mechanic is telling me it's the abs pump that need to be change.My brake light was never on all i wanted to

Question about Ford Crown Victoria

3 Answers

...master cylinder malfunctiioning? can i change that with out a code tool? do i have to take it to the shop to have it done? i have changes alot of these on older cars but this while abs thing has me ...

Question about Ford Crown Victoria

1 Answer

...changing gears..... can anyone help or had same problem? Definitely a hydraulic issue. Iknow you said they were both changed, but its usually the master & slave assembly that go faulty on the ...

Question about Ford Crown Victoria

1 Answer

...grand am with a v6 engine.. I dnt kno what else to do please help Bleed the brakes using a vacuum pump with a can, or use a pressure bleeder at the master cylinder to drive out any air in the

master cylinder.Bled green fluid!Help! It certainly sounds like the brake hoses are kinked or collapsed internally. Did you replace the flexible hoses or the steel hydraulic line? When you removed the

Not finding what you are looking for?
2003 Ford Crown Victoria Logo

751 questions posted

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...