1998 Pontiac Sunfire "trunk pull down manually" Questions

...pull down "Trunk pull Down Motor Suddenly stopped working" Checked 40 Amp fuse (109) under the hood-- OK. With the trunk open, the trunk ajar light on the dash does not come on. The trunk light does ...

...trunk you can pull the manual release t-handle that is in the trunk. it should glow when it is dark in the trunk. good luck i hope it helps You can only fold down the seats by pulling the latches ...

Trunk pull Down Motor Suddenly stopped working The pull down motor suddenly stopped working, This is a stretched town car. How do i test motor? Where can i find the fuse box/ boxes? If you have fuse ...

...is failing? open back seats and pull emergency internal release, or use key how did u get into trunk i'm currently with roadside assistance with 2013 pursuit charger key in trunk no pull down back ...

...pull inside of trunk. My four door 95 cutlass hass fold down back seats. Theres a small leather loop to pull on on both sides near the seat belt despenser. Also I pulled down the glove box lite and ...

...trunk manually. Pull down the back seat armrest and open the door for trunk access. There is a yellow handle that is above the door, pull the handle and the trunk will open manually. The remedy for ...

...trunk, there should be a knob at the top right of the opening. Pull that and it will unlock the locking mechanism for the rear seats. I just recently figured that one out myself! there should be some ...

...trunk pull down motor I need instructions on how to remove and replace a 86 camaro trunk pull down motor. buy a replacement unit from the junk yard or from ebay. or do as i did and make the uint into ...

...and pull it, it should manually pop the front hood/trunk. As for why the electronic popper is not working may be some bad relay or blown fuse. May be a trip to your local Porsche mechanic. Good

...pull the trunk lid down SOLUTION: check and make sure lock is works properly. you cab check by opening trunk and locking it with remote key, then pry the lock with a screw driver to see if it unlocks ...