1998 Pontiac Sunfire "secondary shoe" Questions

Ad

...secondary,the thick lining or the thinner one? The shoe with the shorter pad mounted to it is the primary shoes and always goes towards the front of the car. The longer of the two goes towards the ...

Ad

...(called duo servo systems) the front shoe is slightly smaller than the rear one and is the primary shoe. On non servo systems, the shoes are the same size -- there is no primary or secondary

Ad

Question about Pontiac Sunfire

1 Answer

...secondary shoe outwards.Disconnect the cable from the secondary shoe.Disconnect the shoes from the anchor block. Disconnect the shoes from the anchor block.Remove the lower return spring. CAUTION: Do ...

secondary shoe and install retaining clip. 6. Install primary shoe on support plate. Secure shoe with new spring retainers and pin. 7. Install spring on parking brake strut and engage strut in primary

...and secondary brake shoe id on 1500 chev primary and secondary brake shoe id on 1996 1500 chev truck . short shoe and long shoe which one to the rear? Short shoe goes to the front, long to the

Question about Pontiac Sunfire

2 Answers

...secondary shoe to the new one. This is accomplished by spreading the bottom of the horseshoe clip and disengaging the lever. Position the lever on the new secondary shoe and install the spring washer ...

...secondary shoe web. Do not attempt to pry the pivot hook from the hole. Remove the automatic adjuster spring and the adjusting lever. Remove the secondary shoe-to-anchor spring with a brake tool. ...

...Secondary Shoe Assembly 11 2A179 Brake Shoe Adjusting Lever Cable Guide 12 2068 Brake Shoe Hold-Down Spring 13 ? Adjusting Lever Pin 14 ? Adjusting Lever Return Spring 15 2A176 Brake Shoe Adjusting ...

Question about Pontiac Sunfire

2 Answers

...secondary shoe. 14. Lubricate and assemble adjuster screw. 15. Install adjuster screw, spring and lever and connect to adjuster cable. 16. Adjust shoes to drum. 17. Install wheel/tire assemblies and ...

...secondary shoe. Remove parking brake cable from lever. Remove hold down pins from brake backing plate. Fig. 9: Installing the anti-rattle spring Fig. 10: Installing the upper return spring Fig. 11: ...

Not finding what you are looking for?
1998 Pontiac Sunfire Logo

1,003 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Pontiac Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...