1996 Nissan Sentra "hit alternator hammer" Questions

alternator is working and charging at 14.07 Volts dc and the battery will read 12.76 if left to stand after charging. But if I leave the car for perhaps a couple hours it may start from the key switch

...hit the ignition, but the engine turned over. charged the battery, seemed normal next morning. later that day, i had to go across town, engine ran non-stop for more than an hour. when i went to ...

Alternator won't work, hit with hammer, will work. What is bad? SOUND LIKE THE VOLTAGE REGULATOR BUT IT IS JUST AS CHEAP TO REPLACE THE ALTERNETOR do not hit with hammer = bad.. does not make ...

hammer, and hit the center of the drum being extremely careful not to hit the studs or you will damage it. An alternative way to do this is hitting the drum in the center avoiding the studs and making

...hammer, hitting it alternately on one side, then 180 degrees on the other side (opposite where you first hit it) this will prevent it from cocking and jamming as it comes out. You have removed all ...

...alternator with a hammer ,not really hard to break it,and see if it helps,if it does replace the brushes,which are usually about $25.00-$35.00,if it doesnt charge anymore then the brushes are ...

...on ''97 k1500 suburban What tool do I use to separate the idler arm from the center link? Tried hitting it with a brass punch and a hammer, didn't budge. take a 3 to 5 pound hammer strrike the ...

...alternator how do you change the alternater all cars. (change , it out? or change its sound? LOL) Swaps. swapouts. pull neg lug on battery ( not true on antique British cars) remove all starter ...

...alternator does not come out how can I remove it Make sure all bolts are out, it may just be tight fitting in the bracket. Take a soft face hammer and tap it switching sides every time or you could ...

...alternator to an autozone, and have them test it. Also, if the van has been sitting for a long time, the brakes will sieze. That may also be why the van won't move. how to break them loose is to put ...