1998 Chevrolet K1500 "code p1345" Questions

Ad

Question about Chevrolet 1500

1 Answer

...p1345 CODE P1345 CAMSHAFT TO CRANKSHAFT POSITION CORRELATION CONDITIONS.POSSIBLE CAUSES - CMP SENSOR IS LOOSE CAUSING A VARIATION IN THE SENSOR SIGNAL - EXCESSIVE FREE PLAY IN THE TIMING CHAIN AND ...

Ad

...p1345 code that stays on i clear it and as i restart the truck it comes back on, the truck runs great and has a small delay when starrted.. what can/do i need to??? 1345 is cam and crank sensor ...

Ad

...p1345 dose it crank? timing will cause this till the engine cools back off 5.7 v8, yes, fuel pump can be done . as far as your trouble code, look it up , repair manual will tell ya. you need one for ...

Question about Chevrolet 1500

1 Answer

...code p1345 you have to take the dist out and check the gear at the end, they wear thin and set this code. install new gear and set the dist for corrolation 0 degrees +2 or -2 degrees. you will need a ...

Question about Chevrolet 1500

1 Answer

Code p1345 is for a difference between cam and crank sensor signals, but a 1999 truck uses a distributor.You might look at the distributor and see if it is loose, or if the shaft is wearing out inside

Question about Chevrolet 1500

1 Answer

...code reader and came up with 3 codes. P0300- random misfire P0440- evaporative emission system P1345- cam to crank position correlation fault hi my is jose, a few months ago i had a toyota with the ...

Question about Chevrolet 1500

1 Answer

P1345 code DTC P1345 - Crankshaft Position (CKP) - Camshaft Position (CMP) CorrelationThe most likely cause if you have replaced the cam position sensor is the distributor is out of time. You MUST use

...code p1345 . replaced fuel pump, filter, 3 oxygen sensors, catalytic converters, cap, wires, plugs, rotor, transmision. still misfire and now it died and won't start. could be fuel injectors flooding ...

...p1345 obd code on 97 chevy 1500 5.7 Lt. P1345 is "Crankshaft position sensor / Camshaft position sensor correlation" Code P1345 determines if the distributor is installed incorrectly, or if a ...

Question about Chevrolet 1500

1 Answer

...code OBD2 p1345 either the crankshaft sensor needs to be changed or camshaft sensor.Both work together and are under that code.If you change the sensors you will need a crankshaft profile ...

Not finding what you are looking for?
1998 Chevrolet K1500 Logo

1,299 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

john h

Level 3 Expert

29494 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...