1994 Chevrolet Camaro "check data time settings" Questions

...a fire condition. Thus the pcm shuts down the injectors. Have the sprk control module /timing

data and perform other tests allowed by the vehicle maker. Scan tools that cover vehicles 1982 to present are available at your local auto supply dealer. You don't indicate any diagnostic tests to

...Data Link Communications System Check . Instrument cluster DTC B1021 sets. The DTC indicates a loss of powertrain control module (PCM) serial data. Refer to Data Link Communications System Check ...

...Link Connector and ground, the DTC is erased automatically.Make sure to check for short circuit to ground between Ignition control terminal of Data Link Connector and chassis ground when DTC is

check engine light to come on after a easy repair? I have a 1994 Saturn SC2 coupe. It was having an overheating problem causing the coolant to project out of the resevoir cap. Turns o Battery has been

...check the timing by setting/checking against the valve timing information in the data section of the repair manual - intake valve opens ?degrees BTDC and closes ?degrees ATDC, etc., etc. This is the ...

...for timing chain for ford f150 2005 the timing for my ford f150 is off if you did not set a code then the timing is not off. Use a data scanner to check it. What makes you think the timing is off

...check engine light, this means your vehicle has not stored it's emissions data in the ROM section of it's computer and you have just deleted all data pertaining to your vehicle's engine and emissions ...

...Check - Data Link Communications 2 Use a scan tool in order to attempt the establish communication with the dash integration module (DIM). Does the scan tool communicate with the DIM? -- Go to Step 3 ...

check engine light is on (from the misfire from the crossed wires), the computer is in "reduced power" mode. You need to clear the codes with a scan tool and try again. If you clear your MIL Lamp--you