1997 Pontiac Sunfire "remove tumbler" Questions

...driver of alan wrench push donw in that hole and the lock tumbler will come out allowing you to repace it. Be sure to remove your negative battery cable before doing this. I hope this helps you

...mechanical experience you may be able to do that without the manual. The column cover needs to be removed and the switch comes out without removing the steering wheel etc. You can use another ...

I can not remove the KEY from the ignition tumbler Try putting the steering column all the up to it's highest point. Mine did that a while ago where I could not get the key out.

...,if it appears ok thenm you have the wrong key ,someone has changed the lock for whatever ,if so remove the clip retainer off the end and remove the barrel ,the you will see the that with the key ...

...as part of the anti-theft system. This could be the issue. There is a video on YouTube that shows how to remove tumbler assy. You will be able to see the sensor then. Or the sensor may be

can not turn key 1997sunfire but can take out of ignition Sounds like the lock tumbler is bad...If it is the one I'm thinking of it is fairly easy to replace...if it has a small wire harness on it you

...all of them. Then you will see the locking mechanism. Remove the nut from the barrel of the tumbler. Disconnect the wires if there is any. Do the reverse to complete the repairs. Hope this

...tumblers inside the cylinder moving it. They will have a hard time replacing it too as they can't remove the cylinder from the bore until it is in the "run" position. Obviously there are ways to

...remove the tumbler. Remove the retaining screw: Use a screwdriver to remove the retaining screw that holds the tumbler in place. Remove the tumbler: After removing the screw, the tumbler should slide ...

...tumbler!!!??? You need to remove the small metal ring that retains the lock mechanism, then remove the turn signal switch (3 bolts, move it up or down to access 2 of them). You will then see a torx ...