...have removed the crank there is a couple of screws on the door arm rest..remove them and using the door panel removal tool..remove the door panel. you may have to lift up on the panel to remove
remove the screw from the trim around the door handle and pry the trim from the door. If you have power locks, disconnect the lock connector from the trim and set it aside. Now remove the panel screws
...window crank to remove door panel- do not see a clip pull handle from door, creating small gap, with needle nose pliers remove clip, is like 3/4 circle that locks handle to door. hope that
...it) on a 1998 Pontiac Sunfire? Pull the inside panel of the door for acess. Disengauge the lock and handle rod and remove screws form door latch to remove.Reverse for replacement. Hope this
...remove the door handles to remove the door trim panel, if it has arm rests on the panel look for 2 or 3 plastic plugs which only press in and are easy to remove with a blade, if they are not present ...
Broken car door latch How do you go about changpng a door latch on a Pontiac Sunfire 2000? remove the inside door panel,there's an access opening for removing two nuts that hold the handle on.
...remove the door panel to gain access to the motor. Take your time removing the door panel. there are usually a couple of screws that need to be removed and then the panel itself is help on with ...
...back door i have a 1999 sunfire 4 door. the power locks work, but the rear doors will not open. I removed the fuse to see if that woild help, but that didin't help. Any sugesstions? There are
...Remove the door trim panel. Remove the water deflector in order to access the window regulator. Remove the window to regulator nuts (4). Push the window to the closed position and tape in place. ...
1,299 questions posted
Usually answered in minutes!
731 Questions
699 Questions
696 Questions
696 Questions
688 Questions