1997 Pontiac Sunfire "crank pulley location sensor" Questions

Ad

pulley that turns all the belts. THe one that is coming off the crank shaft. the crank sensor is located behind the harmonic balancer, and Yes your car will not start if that sensor is out. It is what

Ad

Question about Pontiac Sunfire

1 Answer

...crank pulley on the 3.8 liter. The crank pulley must first be removed. A 15/16" socket, three very long 8 x 1.0 bolts (pretty sure that is the size, some large washers, and a crank pulley pulley will ...

Ad

...front wheel and the splash shield, it should be there next to the pulley. the 3.1 engines crank shaft sensor is located behind crank shaft pulley.the 2.4 engine crank sensor is next to oil

...on honda odyssey 1999 crank sensor is located to the upper right hand side of the crank pulley. you have to remove the pulley to access this. you can test it without removing the pulley

Question about Nissan Cars & Trucks

1 Answer

...to the crankshaft pulley. it will be inserted into the block with the top part of the housing half way out. you cant miss the wires leading into the tip of the housing next to the crank shaft

Question about Pontiac Sunfire

1 Answer

...crank pulley just to the back of the pulley and go around the pulley you should find the sensor mounted on a bracket. You should see what appears as a sprocket with widely spaced teeth on the engine ...

Question about Pontiac Sunfire

2 Answers

...near the crankshaft. Heres a picture of the crank sensor, this sensor is located at the crant pulley, it sits next to crank pulley ,heres a diagram also to help you locate sensor. hope this

crank pulley. The crank pulley is in central pulley which all the belts are ultimately driven from. It will be in the center-line & bottom of the front of the engine. Typically they are ~45deg off

...located on a 1995 Jeep Grand Cherokee Larado 5.2 liter engine front of the engine near the crank pulley on the crankshaft pulley inside the pulley its a little cylinder which is your crank ...

...crank pulley. it has to be lined up perfectly when replaced. You will understand when you remove the crank. Check the crank pulley very closely after you pull it off. they are noted for the rubber ...

Not finding what you are looking for?
1997 Pontiac Sunfire Logo

1,299 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Pontiac Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...