1995 Pontiac Firebird "replace license plate light socket" Questions

...replace the license plate bulb and your light still won't work, there may problems with the wiring. Many of these bulb housings also ground directly to the car, so check for corrosion or other ...

replace license plate lights Follow the Steps on how to replace license plate light on your car. 1. Open the trunk and locate the trunk liner retainer clips.Use the Phillips head screwdriver to loosen

...replace bulbs that lights license plate. License plate and light is part of trunk raise trunk lid look on the inside behind your license plate light there should be access to the bulb there. You will ...

...replace the lamps. To Remove: Remove the two mounting screws from the license plate lamp. Remove the license plate lamp from the rear bumper fascia. Remove the license plate lamp socket by turning it ...

License Plate Lights I figured my license plate lights were burned out, so I replaced them today, They still don't work. I checked all the fuses...the cig lighter fuse was burned out...replaced it, ...

...replace the license plate light on a 93 geo metro this is in the operators guide. (get one?) R&R Disconnect the negative battery cable. Remove the screws from the license plate lamp assembly. ...

...license plate lights still won't work. All the other lights work like the side marker lights, tail lights and so on. I can't find the problem. first of all i would get a 12- volt tested and turn the ...

626? it should not need more that 10 amps where can I find the entire socket for license plate for my 1998 Mazda 626 LX? I have power to the socket and changed bulbs, buy need to replace entire socket

lens, grasp it from behind the license plate opening Then, pull it out of the side and replace the bulbRemove the bulb from the socket and replace. Installation is the reverse of the removal procedure

replace license plate lights on 95 ford explorer. can't reach underneath the bumper. does the plastic assembly just twist off? From underneath the rear of the vehicle, grasp the lamp socket and rotate