1996 Nissan 300ZX "remove install oil pump" Questions

Ad

Question about Nissan 300ZX

1 Answer

...remove oil filter. wait for oil to drain completely then re-install drain plug and new oil filter(filled with oil) undo oil cap and pour in oil 4.5 quarts on n/a and 5 for turbo. tighten cap and your ...

Ad

Question about Nissan 300ZX

2 Answers

...Remove all the spark plugs with a 5/8ths spark plug socket and check them for color. CAUTION!!!!!!! MAKE SURE THERE IS NOTHING ANY WHERE NEAR THE SPARK PLUG HOLES WHICH COULD ACCIDENTALLY FALL INTO ...

Ad

Question about Nissan 300ZX

1 Answer

...remove the pliers. 7. At this point you will need the assistance of another person. Have them sit in the car, you top off the clutch master cylinder (the one which has just one resevoir) with DOT 3 ...

...oil leaks and replace the gasket as necessary. 7. Inspect the exhaust manifold studs for breakage and missing nuts. They are 8mm 1.25 nuts with a 12mm wrench size. Do NOT over tighten them! Torque ...

Question about Nissan 300ZX

1 Answer

...INSTALL A MEMORY SAVER BEFORE DISCONNECTING NEGATIVE BATTERY CABLE. TO KEEP FROM LOSING PCM MEMORY. TO REMOVE OIL PUMP.YOU NEED TO LOWER OIL PAN.REMOVE THE LEFT AND RIGHT ENGINE MOUNTS AT THE ...

...Remove the two oil pump bolts and the oil pump.INSTALLATION1. Clean and inspect the mating surfaces.2. Install the oil pump and loosely install the two oil pump bolts.3. Install the oil pump screen ...

Question about Nissan 300ZX

2 Answers

...remove the oil pump. To install: Prime the oil pump with clean engine oil by filling either the inlet or outlet port with clean engine oil. Rotate the pump shaft to distribute the oil within the pump ...

Question about Nissan 300ZX

2 Answers

...Remove the oil pump. Refer to Oil Pump, Pump Screen and Deflector Removal. A loose screen or pipe assembly can result in an air leak and loss of oil pressure. For more information, refer to Oil Pump ...

...remove the oil pump from the engine. To install: Clean and inspect the mating surfaces. Install the oil pump and loosely install the four oil pump mounting bolts. Tighten the four oil pump bolts in ...

Question about Nissan 300ZX

2 Answers

Remove the through bolts in the engine mounts and raise and support the engine. (This is easiest with an engine lifting fixture.) Remove the oil pan. Remove the oil pump. Reverse procedure to install

Not finding what you are looking for?
1996 Nissan 300ZX Logo

48 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Nissan Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...