1993 Nissan Maxima "power locks dont always work" Questions

...power door on the pass side and a manual slider on the drivers. alot of times the drivers locks and dont lock like it has a mind of its own but it always works with the drivers controls. and then the ...

...power door locks do not lock all the time in my 2007 Pontiac Grand Prix GXP. They are intermittant. The UN-lock works good. Locking sometimes fails when: Putting the car into gear; Pressing the lock ...

power door dont lock I would recommend that you check your fuse panel, that is always the first place to look when you have an electrical issue, or something electrical is not working in your car.

directionals and power locks dont work sounds like a bad relay. but always check all the fuses, they might look good but until you pull it all the way out is the only way to tell.

...power windows and lock work for about 2 or 3 minutes and then it stops. Also my left turn signal makes the clicking noise on the inside, but on the outside blinks once or twice and then dont work ...

...power lock actuator/solenoid help the doors that don't work? Well this also be able to fix the ones where the automatic locks dont work but can be opened and closed manually? How can I fix the locks ...

...dont like letting people in as i cant be bothered locking all the doors individually any more. Arggh. Also, after being in the car about an hour, the locking seems to kick in and the doors open. Im ...

...power lock dont either Check the CTSY fuse 1990 Cutlass Supreme - 3.1l (T) engine. Had a leaking gas tank, replaced it and pump, filter etc...ran rough and wouldn't stay on after warm up. Ohm'ed out ...

power windows and doors dont work and interior lights stay on check for broken wires from drivers door to dash, the wires are in rubber boot where door hinges are, open drivers door and look at hinges

power. Semi-Solution for Locks: Listen for very quiet click when you lock/unlock doors, if you hear it, uve got major work to do, if you dont, then take apart the door and check the switch connections