1987 Nissan Pickup "distributor wiring" Questions

Ad

Question about Nissan Pickup

1 Answer

distributor not firing distributor has proper power going to it but still has no spark any ideas what it could be without replacing whole distributor We need to know what you mean by "proper power". ...

Ad

Question about Nissan Pickup

1 Answer

get fire every where else but through distributor and plugs spins over fine changed distributor, plug wires, coil, and ignition coil and still won't start what else to do i checked for bad grounds

Ad

...distributor tests good, ignitor good, no distributor signal at ignitor wiring How are you doing this testing? You need wiring diagrams,regardless of what has been done so far, if your to

...of the resistor goes to the + side of the coil. The - (negative post) wire goes to the side of the distributor. The firing order is 1 3 2. Cylinder #1 on the distributor cap is by the vacuum advance ...

Question about Nissan Pickup

2 Answers

took the distributor out and cleaned it then put it back in and now the truck wont crank but tries to do so. need some tips please Did you take out the ENTIRE Distributor or just the cap? If you took ...

I mixed up the spark plug wires connected to the distributor on my 1991 Toyota pickup 4 cylinder. I know the firing order I just don't know where to wire each of them to the distributor, if anyone

...to determine when the #1 cylinder is at TDC (Top Dead Center) - when it would be firing. Take the distributor cap off and look at the rotor - it would be pointing at the #1 spark plug wire on the ...

We pulled and replaced spark plugs and distributor cap on a 1985 Nissan Z24 Engine - started once before without cap on but now will not fire again. I need firing settings for distributor and knowlege

Where is the ignition coil of a 1997 Nissan Pickup 4 cyl. located? COIL IN THE DISTRIBUTOR. ON THE 97 PICK ..IF YOU LOOK AT THE DISTRIBUTOR CAP YOU'LL NOTICE ONE WIRE IN THE MIDDLE OF THE CAP THE DOES

Question about Nissan Pickup

1 Answer

how do i install a distributor to a nissan pick up It is necessary to place the No. 1 cylinder in the firing position to correctly install the distributor. To locate this position, the ignition timing

Not finding what you are looking for?
Cars & Trucks Logo

582 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Nissan Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...