1986 Nissan Pickup 4WD 1986 "86 fire" Questions

its a 86 nissan 4x4 with a 2.4 with 8 wires I need the firing order . On the 4 cylinder engine the firing order is 1-2-3-4 from the fan. On the 6 cylinder engine the firing is 1-3-5 on the left from ...

...plugs wont I had to replace the magnetic pick-up sensor on the side of the distributor that tells the coil when to fire on my 86 truck. It was $80 and slips onto the distributor held on by the

86 HB Pickup 4x4 Z24 has no fire changed all parts still no fire parts replaced : computer, coils, distriber , ignition modules Try mass air flow sensor.

need firing and wiring digram for 86 nissan z24 For the 2.4L (Z24) SOHC: Firing Order: 1-3-4-2 Cylinders P__ u|.|.| Intake Side l |.|.|....1....2.....3....4......| l |.|.| Exhaust Side e y Distributor

need firing order for 1986 nissan pickup with a z-24 engin Here is the firing order diagram for that engine. that didnt help me at all that just made it worse i just bought an 86 nissan truck and was ...

my nissan truck will not start. it will turn but wont start. the truck is an 86 nissan hardbody with a 3.0. i had to pull the heads and replace all the valves. the timing belt broke on me. make sure ...

...86 4WD Hardbody Z24 engine- It has 2 coils and 8 plugs even thogh its a 4 cyl. I think intake and exhaust plugs. One side is not firing. Changed coil and it didnt fix. How can I test and figure out ...

back fires through the carb at higher rpm cuts out 86 toyota truck 22-r replace pickup coil, ignighter, and coil, problem started with no spark. now that its running it backfires through carb at ...

...fire and melts terminals. why? I had the same problem occur on an 86 model Nissan truck. It was determined that the alternator was overcharging the battery and caused it to get hot to the point it ...

...fire wall which gives you a motor id @ and trk model # you can then know what engine vacuum diagram you need.i have a diagram for an 86 720 series Z24 carb engine that can be copied off of ...