2001 Chevrolet Tracker "replace timing chain bear" Questions

...replace the cylinder head,timing chain,chain guide,chain tensioner for a new one? does it sound like heavy metal ? check main bearings / rod bearings? does oil pan have dents in it, could be hitting ...

...bearings that the belt runs on can wear out as well . This is make and model specific! Google year make model miles to replace timing chain year make model miles to replace timing chain Google ...

...while driving on hill only.can any help me. replace the worn chain and replace the big end and main bearings they are worn to the pint that the oil rings cannot control the oil loss from the ...

timing chain. What could it be? I have a 1970 mustang with a 351 Windsor motor in it. I has a terrible knocking sound. We replaced the main bearing and timing chain. It doesn't sound like it is coming

...or chain and when should it be replaced timing belt replacement is 168,000 km yes and replace the idler bearings as well I lost a great engine because they only changed the belt and not the ...

...timing chain is re-installed, even without tools you should be looking for a chain that is obviously taught.  Not piano wire taught as this will lead to early failure but certainly one without ...

...timing chain guides are worn out, they are a bear to replace. i would wait until the water pump goes out eventually and replace the chain pump and guides all at once. not cheap but definitely a ...

...replace the rear main seal and reassemble. It's a 1966 engine...you should consider replacing the front timing chain with a roller chain as well as rod and main bearing inserts if you have to do all ...

...timing chain. Replaced ait sensor crank sensor and cam sensor. Only have spark at on Replaced sensors and checked ground spark only at one cylinder. Shop replaced water pump and timing chain? First ...

replace the timing gears, chain and guides. You must know all proper torque values for the crank and rod bearing caps, flex plate, and timing cover. As you can well see, this is not a job for the auto