2001 Chevrolet Tracker "installing power steering pump 01" Questions

power steering (if equipped), and the crankshaft pulleys. Adjust the A/C compressor drive belt to obtain 6-9 mm (0.24-0.35 in) deflection. Tighten the A/C compressor mounting bolts to 13-20 f t. lbs.

...installing. NOTE: Gasket and Trim Adhesive D7AZ-19B508-B or equivalent meeting Ford specification ESE-M2G52-A is recommended to hold the water pump housing gasket in position. Position a new water ...

...power steering pump replaced. I tried changing the belt and the tensioner, but still squeals. Is it possible the pulley on the power steering pump was reattached incorrectly? It looks fine and I see ...

...power steering pump on it and I drove it two days and the power steering fluid is running out of the bellow where the inner tie rods is in. My husband thinks the inner tie rod needs replaced. I ...

...power steering pump the seal was upset and would not seal again. I found a guy on the internet who had a kit for under $75 shipping included (sorry can't remember sight name). This kit comes with a ...

power steering pressure hose retainer brackets from the engine front cover studs (two places). Position the power steering pressure hose (3A719) out of the way. Remove 16 bolts retaining oil pan (6675

...power steering pump drive belt, and the A/C compressor drive belt (if equipped). Refer to Section 03-05 for the removal procedures. Raise and support the vehicle. Use Strap Wrench D85L-6000-A or ...

...installing the belt onto the water pump, the right bank cam sprocket and the tensioner. With your fingers, apply gentle counterclockwise force to the left camshaft sprocket. When the belt is taut on ...

...power steering pump bracket bolts Air conditioning compressor mounting bolts and position it aside leaving the hoses attached Ground strap from the top of the transaxle No. 4 engine mount ...

...power transmission or grip between tyres and carriageway should also be utilised as far as possible to minimise the braking distance and maximise vehicle deceleration. Why ABS? Although today ...