When replacing the ignition rotor on 1988 GM V8 should the rotor pull off the shaft? Does the rotor have screws to hold in place? The distributor rotor just slides on the distributor shaft with no ...
...cant seem to get it back in right! wont start! got it to top dead center many times! they say put rotor to cyl #1 but do they mean #1 in cap or face rotor to cyl# 1 sparkplug?? when the engine is a ...
rotor under cap keeps fouling out will not run very long wiyh new rotor Fouling how? Geting burned? Have any ignition enhancers? Perhaps you should seek a good cap and rotor with brass contacts. ...
I need to replace ,the rotor button... TAG OR NUMBER ALL SPARK PLUG WIRES ON THE DISTRIBUTOR CAP BEFORE REMOVING CAP. SO YOU CAN PUT PLUGS WIRES BACK IN THE ORIGINAL POSITION. WHEN ALL PLUGS WIRES ON ...
...relay has failed. If it cranks and cranks but won't catch, you may need to replace the cap and rotor - they wear out over time and will fail to allow the vehicle to start if they wear out
truck wont crank. we have put new distributor cap, rotor button, coil pack, plugs, wires, and fuel pump. we also checked our firing order. you said you repl dist cap that means you don't have a crank ...
after i did a brake job I came across new problem. When I come to a stop I get a pusating feeling and pedel goes down at 15 miles anhour and under .Is it a sencer? ABS ,this vehicle is only repairable
new cap&rotor and now i have a idling problem make sure that you did'nt knock a vacuum line loose while changing the cap and rotor.
Question about Chevrolet 1500
changing distributor cap and rotor. does the rotor just pull off? It is stuck on pretty good Should slide off but may have a small c clip or require a puller
how to remove rotor Take off Brake Caliper,, DON"T KINK THE HOSE or let caliper hang freely from it! Rotor should come right off after caliper.
1,180 questions posted
Usually answered in minutes!
878 Questions
754 Questions
575 Questions
561 Questions
414 Questions