1999 Pontiac Grand Am GT "remove rear motor mount" Questions

Ad

Question about Pontiac Grand Am

1 Answer

...techs use that will roll the motor forward to get more room for acess to the rear plugs after the upper front motor mount(dog bone) is removed.you can buy one at the auto parts store that sells

Ad

Question about Pontiac Grand Am

1 Answer

...rear bank, was told to pull the dog bones to pull the motor forward for easier access. Will this be easier? Open to any other suggestions please help. Remove the top dog bone & either pull the ...

Ad

...Remove the rear support bracket. Pull the rear dust cover back (if applicable) to gain access to the rear starter bolt and remove the rear bolt. Note the number and location of any shims. Push the ...

...remove the front motor mount and rear motor mount use a jack to roll the motor forward use a large punch to remove then use a after market bolt in plug or after market frost plug block heater that ...

Question about Pontiac Grand Am

2 Answers

...remove rear mount bolt loosen front mount bolt to change plugs pull engine forward and secure bolt in hole to keep elevated to change plugs The back sparkplugs are nasty to get to, but with the right ...

...Remove the two smaller bolts from each side of the rear of the sub-frame (total 4 bolts) and then loosen the two remaining larger bolts holding the rear of the sub-frame (these bolts go through the ...

...REMOVE THE SUNROOF MOTOR UNLESS THE SUNROOF IS COMPLETELY CLOSED.OTHERWISE A NEW MOTOR WILL HAVE TO BE INSTALLED AND TIMED WITH A TOOL THAT COMES WITH THE NEW MOTOR.THE GLASS PANEL CAN BE ...

Remove the rear coolant recovery reservoir mounting stud. Disconnect the cooling tube from the blower motor. Disconnect the electrical connector from the blower motor. Remove the blower motor mounting

Question about Pontiac Grand Am

2 Answers

Remove the rear coolant recovery reservoir mounting stud. Disconnect the cooling tube from the blower motor. Disconnect the electrical connector from the blower motor. Remove the blower motor mounting

Question about Pontiac Grand Am

1 Answer

Remove the rear wiper arm from the rear wiper motor output shaft. Using a small thin-bladed tool, gently pry at the notch in the base of the rear wiper motor output shaft bezel to unsnap the nut cover

Not finding what you are looking for?
1999 Pontiac Grand Am GT Logo

2,035 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Pontiac Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...