1994 GMC Suburban "replace heater core" Questions

...heater core,thermostat,and radiator. I checked the blend door while I had the heater core out and it works fine.With the heater hose that goes to the radiator connected and the hose that goes to the ...

heater core. Replacing a heater core can be a difficult job. If you decide want to try it I suggest you get a shop manual to help you out. I can give you a relatively easy temporary fix that will stop

...to either heater core. I have the same model suburban. I replaced the heater core. You will probably end up replacing both. You can buy them at Oreilly or AutoZone. and install yourself with a

replace the heater core If you don't live in a place where you need the heat, you can bypass the heater core all together. Take both hoses loose from the heater core, which should be located to the ...

...are not working on 95 suburban? Not getting flow through either heater core on 95 suburban. Replaced t-stat, and temp doors are working, but no heat. try flushing the heater core with a garden ...

...heater ac works fine. replace thermostat and flushed/filled radiator fluid. Now truck temp is good. But heater blows cold no matter what. it must be stopped/plugged up somehow. How do I fix it? check ...

...heater core I came out of work today and noticed water dripping from under the passenger door, I knew immediately it was the front heater core from previous experiences. I have heard the dash has to ...

...heater core, I have plenty of coolant level, no heat in defrost mode either. What's wrong? If you haven't already, try replacing the thermostat located on your engine's intake at the upper radiator ...

replace the front AC evap. core? more than likely because there are brackets and lots of tubes and ports for the heater under there and it's easier sto remove/install the core with the dash out of the

...heater core but thats very rare. Is there a switch or could the compressor be bad? How can I check? I still get heat but the defrost fogs windows. You have a leak in the heater core. It will have to ...