1994 Buick LeSabre "92 3 idle problems" Questions

...3 things that cause this, 1st and most common is a dirty idle speed control valve, 2nd is carbon on the back of the intake valves, last but not least is the wrong octane of fuel, if it requires 89 ...

...3 to 10 psi drop Please rate you mechanics help, have a great day i have replaced all sensors on my 92 buick and also the spark plugs and the fuel filter and it just doesn't want to idle right if i ...

92 buick lesabre 3800. Eng cranks but will not start. I spray ether into air cleaner & eng will start, run & only continue running while spraying ether into air cleaner. By keeping engine running 2 to

92 Isuzu Rodeo running rich on fuel along with high idle issue every once in awhile. I have change MAP sensor, EGR, OI sensor, cleaned the throttle body, replaced the TBI senor and now I am still at a

...92 Mazda mx3 with a 1.8ltr v-6 while at an idle goes from 1500 rpms to 900 rpms and back up and down but not while driving, how do I get it to idle correctly change the idle air control motor and ...

...92 , which ran only 67000 miles here's the problems I get 1. its not resting in proper idle time 2. when its in parking gear or Neutal it gets accelerated. 3. its just surge up , I tried adjusting it ...

...3 turbo starting idiling funny now that the temperature outside has gotten hot out. I don't know if this has anything to do with it, but I bought it used two weeks ago, and it's ran great ever since. ...

...92 Saturn sl started having problems a few days ago. It was abnormally hard to find the friction point and when I finally found it it started out really slowly. Last night it had major problems. I ...

92 camaro dies after starting with rough idle. It ran fine, driven daily. I did a full tune up a few months back. 3 weeks ago i replaced the cat. Last week I changed the fuel pump, fuel filter, MAP ...

92 toyota pickup, v6, 2wd. Stops running after 20 minutes at idle. didnt pass timing on california smog, adjusted to manufactured specs, went back and the timing was jumping all over. the mechanic ...