...side of the dash. You will just need to tighten these two bolts. If you do have tilt wheel, then it is going to require taking the steering column out and replacing the u-joint in the steering
steering column or the u joint outside the firewall. im lost and i really dont want to change the steering column unless i have to. thanks when you replaced the steering box did you check the position
...replace the rag joint at steering box of a 1976 Doge D100 truck. Can you give me any information on how to do it ? first thing is to loosen the column mount at the fire wall inside where the column ...
replacing u jiont should i replace whole steering column or just u joint What does the U-Joint have to do with the steer column?
...joint firstit's a small ***** to replace but not impossible usualy you have to unbolt the collumn inside the cab (Two bolts under the bottom of the dashboard, there's a cover to remove beneath the ...
...replace the steering column on a 1991 safari. / Start by locating the u-joint where the column inside the vehicle ends and protrudes through the fire wall and removing the one retaining bolt. Next ...
...column, the steering gearbox or the constan velocity joints. The lower steering coloumn viewable from the engine bay below the brake unit has a rubber coupler which breaks and can cause the column to ...
...replace the universal joint rod in the steering column. The main reason for these joints to fail is due to people driving with the column in an attitude of either up from the straight position, or ...
...replace with a new one. Thanks for your help, Dan. this is for 1996, don't have 89. these may be steps you need Remove pinch bolt from steering shaft flex coupling. Disconnect shift cable from ...
297 questions posted
Usually answered in minutes!
1,731 Questions
1,603 Questions
1,084 Questions
904 Questions
897 Questions